Soundstream XTA600.2
Soundstream XTA600.2 XSTREAM 2 Channel Amplifier 1200 watts Model XTA600.2 Part No. XTA600.2
|
|
|
On Sale $249.95
Regular $299.95
|
Detailed Description of the
XTA600.2:
XTA600.2
Soundstream XTA600.2 XSTREAM 2 Channel Amplifier 1200 watts
XSTREAM 2 Channel Amplifier 1200 watts
RMS Power (4 ohms): 150 watts x 2 ch.
RMS Power (2 ohms): 300 watts x 2 ch.
RMS Power (1 ohm): Not Stable
Bridged RMS Power: 600 watts
Peak Power Output: 1200 watts approx.
Min. Impedance Unbridged: 2 ohms
Min. Impedance Bridged: 4 ohms
THD @ Rated RMS Power: 0.05%
Speaker Level Inputs: No
Amp Preamp Outputs: Yes - 1 Pair
Built-in Crossover: HP (50-500Hz), LP (30-500Hz)
Bass Boost: 0 - 18 dB
Signal-to-Noise Ratio: 96 dB
Fan Cooled: No
Fuse Rating: 25A x 3
Bass EQ Control: Fully adjustable subwoofer equalization circuit providing frequency and boost ("Q") adjustment for optimum subwoofer performance. A frequency tracking subsonic filter protects woofers from potentially harmful low frequency information and maximizes output in a usable range.
Drive Delay II: Amplifier section powers up 2 to 3 seconds after the poewr supply eliminating turn-on and off pops. The turn off process is reversed: Amplifier section turns off first, followed by the power supply.
Flexible Input Level Control: Allows 500 mV to 4 V input sensativity.
Trident 3-way Protection
IDI (Intelligent Distress Indicator)
Thermal / Short / Over Load Protection
Stability:
2/4 ohms Stereo Mode
4 ohms Mono/Bridged Mode
P.W.M Mosfet Power Supply
Power and Protection Indicator
Selectable X-Over HPF / Full / LPF
18db Bass Boost with Switch Sub (50Hz)
Frequency Response: 10Hz - 30kHz
Variable High-Pass Crossover (50-500Hz)
Variable Low-Pass Crossover (30Hz~500Hz)
Gold Plated Terminal Strips / RCA Jacks
Heavy Duty Heat Sink
Adjustable Input Sensativity
Soft Delay Remote Turn-On
Low Level Inputs
Phantom Channel For Powering Center Speaker or Subwoofer
Dimensions: 24.9"L x 12.4"W x 3"H
Soundstream 1-Year Warranty
|
